Macos 11 Big Sur On Unsupported Macs

18-09-2021 by

Sadly, these Macs are way too old to even boot Big Sur, so they do not support this patcher. Note: 2008 Mac Pros do work with Big Sur, but not with this patcher. I recommend checking out StarPlayrX's BigMac Patcher for those. If you’re an advanced user who is comfortable with running unsupported system software on unsupported hardware, and you’re feeling adventurous, there are some solutions to install and run macOS Big Sur on unsupported Macs, but it’s nowhere near as straight forward or simple as installing Big Sur on an officially supported Mac is. MacOS Mojave Patcher Tool for Unsupported Macs. Machines that ARE NOT supported:. 2006-2007 Mac Pros, iMacs, MacBook Pros, and Mac Minis:. MacPro1,1. MacPro2,1. iMac4,1. iMac5,x. When it reboots, it should now boot into a fully working copy of macOS Mojave. In this video, I am going to show you how to install the latest version of macOS Big Sur (11.1) on an Unsupported Mac (2010-2013)Link to the patcher (Shout-o.

Big Sur on unsupported Mac

Installing Big Sur on an unsupported Mac can’t be done the regular way through System Preferences > Software update. However, if the machine’s not too old, there’s still a way to install Big Sur on an unsupported Mac using a specially developed patcher tool.

Big Sur Workaround

At first glance, it may seem impossible to install macOS Bug Sur on a machine that’s not supported. If you are using a Mac that’s too old and go to its Software Update section, you will see that you are simply not allowed to install the Big Sur upgrade. If, however, you are determined to get Big Sur on your Mac, it may still be done in a roundabout way, by using a specially-developed patcher that you can download from here.

Depending on how old your Mac is, the patcher may or may not enable you to install Big Sur – some Macs are just too old, and even the patcher cannot make it possible for the latest macOS to be installed on them.

On the linked page (from where you can download the patcher), you can find notes that show for which Mac models (and hardware compositions) the patcher is most likely to work and for which it’s not recommended to try it. Carefully look through those notes and if it turns out that your Mac doesn’t have the necessary prerequisites, it’s best if you don’t try the patcher as it will probably not work and may cause unnecessary complications that could be difficult to fix. There is a reason why the latest macOS isn’t supported on older Mac models. The system requirements of Big Sur are higher than what most of the older models can effectively handle and so, unless you are certain that your Mac can run on Big Sur (check the notes in the link), it would probably be best if you kept its current macOS, that it can run stably.

Important Note

Also, it is important that you back up your important data – even if your Mac model and hardware composition are compatible with the patcher according to the notes, you should still make sure that any important data you don’t want to lose is safely backed up.

Another thing to mention is that, if you are using FireVault, you need to have it turned off, or else the patcher will probably not work.

The last precaution before you start with the Big Sur installation is to download the current macOS that you have on your Mac/MacBook onto a USB stick so that, should there be a problem with the Big Sur installation, you can always install the older macOS onto the machine using the USB stick.

With all that out of the way, here’s how you can use the Big Sur patcher to upgrade your unsupported Mac to the latest macOS.

How to install Big Sur on unsupported Mac

To install Big Sur on an unsupported Mac, you must first create a bootable USB drive using a special patcher app. Then you need to use the USB drive to install Big Sur on the unsupported Mac, and, lastly, you must install the needed patches.

Creating a bootable USB stick using the Big Sur patcher.

The first phase of the process involves creating a bootable USB drive with the help of a special patcher, so here’s how to do that:

  1. Start by getting an empty USB stick with enough space on it – it is recommended the stick has at least 16 GB free storage space (the more, the better).
  2. Plug the empty USB stick into your Mac, go to Spotlight (the magnifying glass icon in the top-right), type Disk Utility, and hit Enter.
  3. Select the View icon in the top-left and select Show All Devices.
  4. Click on the USB drive from the left panel, and select Erase.
  5. In the Erase window, make sure that the format is set to Mac OS Extended and click on Erase.
  6. After the USB drive is erased, close the Disk Utility, open your browser, and go to the page where the patcher is (here is the link to it again). DO NOT remove the USB stick from your Mac – it must stay plugged into the computer during the next steps.
  7. Look at the right side of the page, where it says Releases (you may have to scroll down a bit), and select Latest.
  8. You will see the latest available patch and down below, under assets, you will see the download link/links for it. Click on the first link and download the file on your Desktop.
  9. Next, close the browser, open the patcher, and when a window pops up on your screen, double-click on the Patched Sur icon.
  10. When macOS asks you if you are sure you want to open the app, select Open and select Start from the newly-opened window.
  11. Next, the patcher will automatically detect what Mac model you are using and show you what Big Sur features will work on it and what features won’t be available – select Continue in that window.
  12. If you want, read the guide that appears on your screen and click Continue again.
  13. On the next page, make sure that the “Release” option is selected, and click on Continue.
  14. In the next screen, select Update, and then click Continue.
  15. Wait until the download finishes and then click on Download macOS 11.0.1 (or whatever macOS version is shown).
  16. Wait for the loading process to complete (it’s likely going to take quite a lot of time, so be patient), provide your Mac password, and click on Continue.
  17. Next, select the name of the empty USB stick and then select Continue, and Continue again on the next page.
  18. The following process could take quite some time, so be patient, wait for everything to be finished, and then close the window. Once the process is complete, macOS Big Sur will be downloaded onto the empty USB stick and will be ready to be installed on your Mac. To close the window, click on Patched Sur in the top-left and select Quit Patched Sur.

Installing macOS Big Sur

Once you have the bootable USB stick ready, it’s time to install Big Sur on your Mac.

  1. Shut down your Mac and when it powers down completely, start it back up, and immediately after pressing the power button, press and hold the left Option (Alt) key.
  2. Once you get a screen with three different options, select the one labeled Install macOS Big Sur. If you don’t get that screen and your Mac starts normally, repeat the previous step until you get the screen with the three options.
  3. When your Mac loads to a screen with four different options, do the following if the current macOS on the computer isn’t Catalina but one that is older. If your current macOS is Catalina, skip steps 4 to 7 and go directly to step 8.
  4. Select Disk Utility and then click on Continue.
  5. Click on the View icon from the top and select Show All Devices (like you did in one of the earlier steps).
  6. In the left panel, select the drive on which the current macOS is installed (should be the one shown at the top).
  7. Next, click on Erase, make sure that the format is set to APFS, and select Erase.
    • Important!: this action will erase everything on the selected hard drive, so it is important to have previously backed up data you wouldn’t want to lose. If you haven’t done that, restart your Mac, back up your data, and then erase the drive.
  8. Once the drive is erased, go back to the screen with four options, select Install macOS Big Sur, and click Continue, and then Continue again.
  9. Agree to the Terms and Conditions, on the next page, select the drive on which you’d like Big Sur to be installed, and select Continue. This will begin the installation of Big Sur and, again, depending on a number of factors, this process could anywhere between 45 minutes to 3 hours (or more).

Patiently wait for the installation to complete and once your Mac starts again, you will have Big Sur installed onto it. If you have performed a fresh install of Big Sur (if you’ve first erased your previous OS, you will have to go through several normal setup steps that are very easy to complete).

Installing Necessary Patches

The last phase of the Big Sur installation is to install several important patches to make your Mac function properly.

  1. Once the computer starts after the Big Sur installation, and you complete any required setup steps (in case you’ve performed a fresh install of the OS), open the icon of the bootable USB drive.
  2. Open the Patched Sur app and select the Patch Kexts.
  3. Click Continue, enter your password and click on Continue again.
  4. Once the patches are installed, the app will ask you to restart your Mac, so click on the Restart to Finish option and wait for the computer to restart.
  5. If your Mac is a very old one, one thing that could help it run smoother is to go back to the Patcher, select Settings, and click on the Disable Animations option. We also recommend selecting the Clean Leftovers button to get rid of any unnecessary files and free up some space on the computer.

Once this is finished, your Mac will be ready for use with the macOS Big Sur installed on it. If you have any questions, do not hesitate to ask them in the comments section below.

You are probably aware that this fall, like every single fall season, the pumpkin spice latte new macOS version will be available to install. However, this year, Apple chose to do things differently.

macOS Big Sur

First thing first, the version number. Yes, we are now looking at macOS 11, after roughly 20 years of macOS 10/Mac OS X incremental updates. Why change now? Well, with the release of this new version which will be available on Apple Silicon-based Macs and which introduces a totally new design, Apple taught it was time.

Weirdly (not really), I tend to agree with that. Indeed, I've now spent most of my life on version 10. That makes me think I still have the CD for Mac OS 9 somewhere and that I should take my first computer ever — the iMac G4 from 2000 — for a spin sometime.. just for fun.

Yet, that is not the only thing Apple decided to innovate on: making perfectly working older Macs obsolete seems to be one of the new features brought by this version. Yikes.

My iMac late-2012

I am actually writing this article on this iMac. Yup, that's an eight years old device still standing perfectly here — accounting for the external SSD I'm running macOS from. I can remember myself saving the money for it for years and then finally going to the store with my mother, picking an iMac from the aisle, buying Microsoft Office like a dumba-- with it and unboxing it at home.. with no Internet connection whatsoever. Anyway.

The fact is, this machine has serious specs that are still relevant to this day. Indeed, my iMac is equiped with:

  • an Intel Core i5 Quad-Core @ 2.7 GHz;
  • 8GB of DDR3 RAM @ 1600 MHz;
  • a 128GB external Samsung M.2 SSD connected via USB-3 with macOS installed on it;
  • an NVIDIA GeForce GT 640M graphics card with 512MB of VRAM (yes, yes, NVIDIA graphics, in a Mac, what a world).

I was then rightfully persuaded while watching the WWDC20, with my specs in mind, that my Mac, will, once again receive this new version, as it did with macOS Catalina. But oh boi was I wrong.. Several hours later, articles started to pop out of nowhere saying my iMac (in addition to my Apple Watch Series 2 and AirPods 1st-gen) was now obsolete and stuck on macOS Catalina.

Unacceptable (!), I taught. But then, I remembered that some people were running the current version on already obsolete machines. So I began to search.. and was I reassured by the dozens of Mac-afficionados already running the macOS Big Sur beta1 on their unsupported MacBooks and Mac Minis.

The trick

Well then, with all those people already installing the beta on their unsupported Macs, I started to work on it for mine. Without spoiling you the ending, I was not expecting for it to work as well as it does (remember, I'm using it right now).

The basic principle of this 'hack' is to disable the verification of the system done by the installer and ideally force the installation by disabling some security aspects of macOS and adding a new library in the process that will help us achieve our goal.

If you follow very simple instructions, the end of the installation is pretty straightforward: in fact you will in the end be doing the same thing you would have been if your Mac had been compatible to start with.

Those additional steps done, some reboots, and an hour elapsed.. et voilà! You are now rocking the last version of macOS (still in beta, remember) on your obsolete system.

As you can see in the screenshots above, first, it's really late, and second, everything works like a charm. From Maps, a Catalyst version of an iPad app, to the new System Preferences.. all is great, great is all! The revamped notification center and widgets section, as well as the new control center are also all there for us to enjoy.. without having spent any more money on it.

Let's get right to it then!

The catch (and how to fix it)

Before we go, you should know that your mileage may vary depending on which device you are following this tutorial with. Indeed, while some of them will have everything working as expected, most of them will lack support for Wi-Fi on macOS Big Sur..

Not to worry, though. The Mac community and the wonderful people participating on the MacRumors forums have seen worse! This is nothing a little patching can't fix. I'd like to thank libneko, jackluke and Andrey Viktorov for their insightful contributions on how to fix the Wi-Fi and his experience. I wouldn't have macOS Big Sur and working Wi-Fi on my iMac if it wasn't for them and other members of this forum.

In such manner, you'd be happy to know that my iMac is ready to roll on the latest version for at least another update cycle — with all functions working properly. If you too, you are experiencing the failed with 66 error or want to fix you Wi-Fi on macOS Big Sur, make sure to jump to step 10 or follow the entire tutorial below.

Imac Late 2013 Big Sur

Also, just a little reminder that this tutorial is intented for Macs that are currently running macOS Catalina (10.15).

November 17th: Since the official launch of macOS Big Sur, more people are trying to follow this tutorial that was previously meant for the beta version. Thanks to some of you who gave me feedback by email, you might have some more luck with the Micropatcher if the following tutorial fails.. Stay safe everyone!

Tutorial : macOS Big Sur beta 1 installation and Wi-Fi fix via kernel extension modification

Macos

Edit July: now that beta 2 and 3 are out, this tutorial and some links might not work anymore. I'll try to update the article with the final release so your mileage may vary.

Step 0: being aware of the risks

If you are not comfortable with Linux or the Mac terminal, please do not attempt this tutorial. If you attempt this tutorial only to make your Wi-Fi working on your already working macOS Big Sur partition, do not do it also if you are not very comfortable with a Terminal as it may completely break your system. Wait for a better solution or buy a cheap Wi-Fi dongle on Amazon instead.

Step 1: downloading the beta

Since your Mac isn't officially supported, the update will not be showing on your system, even when enrolled in the beta program. You'll need to download the special package directly from Apple CDN, here (9.56GB).

Step 2: downloading the additional library

We need to inject an additional library named Hax.dylib during the installation process. You need to download it here (32KB).

Step 3: moving the library

To make it easier later (when we will use the $PWD variable in the Terminal), use the Finder to move or copy the library to your home folder. In my case this is /SAMSUNG SSD/Users/juliensatti/.

Step 4: booting into recovery mode

Before actually installing macOS Big Sur, we need to disable the system compatibility check layer, disable the system integrity protection (SIP), disable the verification of the libraries and, only then, insert our Hax.dylib in an environment variable.

To achieve all that, we first need to BOOT into recovery mode. Simply restart your Mac and immediately hold the CMD-R keys on reboot until you see the recovery OS.

Step 5: disabling SIP

Run csrutil disable in the recovery Terminal accessible in the menu bar under Utilities. You will also be able to check the success of the command, back in Catalina (so, after a reboot), by running csrutil status (optional).

Step 6: disabling compatibility check

Run the following command in the previoulsy opened Terminal in recovery mode: nvram boot-args='-no_compat_check'. Nothing should show up if successful.

Step 7: disabling libraries validation

First, REBOOT your computer into recovery mode (step 4). Then, open a new Terminal from there and run this long command: sudo defaults write /Library/Preferences/com.apple.security.libraryvalidation.plist DisableLibraryValidation -bool true. If you get an error regarding sudo, try the same command without it.

Step 8: inserting the additional library

From the same Terminal, execute launchctl setenv DYLD_INSERT_LIBRARIES $PWD/Hax.dylib. This command will add the Hax.dylib library in your home folder as an environement variable.

Step 9: installing macOS, finally

To proceed with the proper installation of the system, REBOOT your computer in macOS Catalina (your original partition). Then, open the InstallAssistant.pkg package that you downloaded on step 1.

At the end of the process, a new app will be installed in your Applications folder (you can find it via Spotlight): Install macOS Beta.

IMPORTANT: If the computer on which you will be installing this version of macOS is not capable of a wired Ethernet connexion and if you do not have another computer on-hand, please also follow step 11 to 13 right now as you may not have a working Wi-Fi right away after the install.

The only thing left to do is to run this new application, select your target partition and wait

Please note that during the launch of the latter app it may seem stuck. It is not, the whole macOS Big Sur OS is being unzipped in the background, please wait. Additionnaly, you can check this by opening the Activity Monitor.

Once the OS is prepared to be installed, click 'Restart' and you should be on for dozens of automatic reboots. Wait for the installation to proceed, give it time.Some time later, you should now have macOS Big Sur beta1 installed on your obsolete Mac. Congrats!

— At this point your Wi-Fi should or should not be working —

My Wi-Fi is working

Great! It's over. Glad I could help! Updates should be arriving in the system preferences, as usual. Don't forget to enroll your Mac to the beta program to receive future betas along the way..

My Wi-Fi is not working

Well then, we have work to do. Be sure to know what you are doing. If you are not but still feeling lucky (and totally aware that you can break your whole system in an instant), then proceed to the steps below:

Step 10: testing the system

In order to make your life easier, try to run the following command from a macOS Big Sur Terminal: sudo mount -uw. If no error is returned as a result, please follow this tutorial from ASentientBot or this one if it still does not work, from libneko. Else, carry on.

Step 11: downloading an older version of the Wi-Fi kernel extension

An older kext (kernel extension) named IO80211Family.kext is necessary in order for the Wi-Fi to work. You can download it here (8.6MB, 20.5MB unzipped).

Step 12: creating the bootable USB

You'll need a bootable version of macOS Big Sur on a USB stick (or an external drive partition, as you wish).

To do this, open a Terminal, make sur that Install macOS Beta is still in your Applications folder and execute the following command by making sure to replace <USB/ Label> with the name of your USB stick or dedicated partition:sudo /Applications/Install macOS Beta.app/Contents/Resources/createinstallmedia --volume /Volumes/<USB/ Label>/

Please note that this command will wipe the content on the volume selected.*

Step 13: copying the extension to the USB

Unsupported

Now that the bootable USB is done with the previous command, you can copy on it the IO80211Family.kext previously downloaded (and unzipped, if not already done).

Step 14: remembering Volume Group UUID and Preboot disk

From a Terminal window running on your installed macOS Big Sur system, run sudo kcditto. Take a picture with your phone of this window as it may come in handy later on.

Step 15: disabling authenticated root

Macos 11 Big Sur On Unsupported Macs Os

  1. REBOOT to the bootable USB drive of macOS Big Sur.
  2. If you have FileVault enabled, neither the author of the original tutorial or I have tested it, but you should be prompted to enter password for the Big Sur installation.
  3. Open a new Terminal window, from Utilities > Terminal.
  4. Run csrutil authenticated-root disable to disable the authenticated root from the System Integrity Protection (SIP).
  5. REBOOT to the bootable USB drive of macOS Big Sur, once more.

Step 16: mounting the volume

After reboot, open a new Terminal and:

  1. Mount your Big Sur system partition, not the data one: diskutil mount /Volumes/<Volume Name. Please don't forget to replace <Volume Name> with the name of your volume. Always prepend spaces in volume name with, for example, in my case: diskutil mount /Volumes/SAMSUNG SSD
  2. Remount it as readwrite: mount -uw /Volumes/<Volume Name>
  3. Make a snapshot to restore if something wents wrong:/System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -s 'BeforeWifiKexts' -v /Volumes/<Volume Name>

You should see: <Volume Name> on /Volumes/<Volume Name> mounted as a confirmation.

Step 17: replacing the kernel extension (kext)

From the same Terminal:

  1. Navigate to the extensions folder: cd /Volumes/<Volume Name>/System/Library/Extension
  2. Backup current kext: mv IO80211Family.kext IO80211Family.kext.backup
  3. Copy new kext from the USB drive, the latter always being mounted at /Volumes/Image Volume : cp -r /Volumes/Image Volume/IO80211Family.kext ..

Make sure there are no errors at the end of these commands. Nothing should appear, it's normal.

Step 18: installing the kernel extension (kext)

That's where things can start to go wrong, proceed cautiously.

From the same Terminal, run the following command: kmutil install --update-all --volume-root /Volumes/<Volume Name>.

You should see Brcm4360, Brcm4331 and some other kexts in the output. There MUST be no errors when running this command. You can see an example here.

Step 19: creating snapshot and making it bootable

Frpm the same Terminal, once again:

  1. We need to create an APFS snapshot for our volume, running the following long command:/System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -s 'WifiKexts' -v /Volumes/<Volume Name>
  2. Then, we need to mark it as bootable:/System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -r 'WifiKexts' -v /Volumes/<Volume Name>The only difference between these two commands, is -s after apfssystemsnapshot replaced with -r

You should see Attempting creation.. and Attempting tagging.. if everything went perfectly.

Step 20: copying updated BootKernelExtensions to the Preboot volume

Well, that's where things went south for me while following a tutorial of my own. I was told to mount the Preboot partition of the disk on which my installed macOS Big Sur is. At Step 1, the Terminal told me this was /dev/disk2s2. However, while executing the right command to mount this partition, well.. no partition with this name was available.

My fix was to run in the current Terminal of my USB Big Sur volume the following command in order to list all the disks (and their partitions) connected to Mac : diskutil list. From there, you should look over to a partition named Preboot and make sure it's the right one (if it's not the only one).So anyway, once that was under control:

  1. Mount the Preboot disk with diskutil mount /dev/<yourprebootdisk> (once again, look at the picture you took on step 13, or do what I did above).
  2. Create a backup of Preboot data by:
    2.1. Navigating to the volume: cd /Volumes/Preboot;
    2.2. Listing the UUID(s): ls;
    2.3. Checking with your picture that this is the correct UUID and execute the following command by replacing <UUID> with your UUID: cp -r <UUID> <UUID>.beforewifikexts.
  3. Navigate to the correct folder in Preboot with the UUID we just confirmed: cd /Volumes/Preboot/<UUID>/boot/System/Library/KernelCollections
  4. Copy BootKernelExtensions from your volume to Preboot:cp /Volumes/<Volume Name>/System/Library/KernelCollections/BootKernelExtensions.kc .
    cp /Volumes/<Volume Name>/System/Library/KernelCollections/BootKernelExtensions.kc.elides .

You should not see anything in return if the commands were successful.

Macs

We can also note that remembering the UUID wasn't really needed because in my case there were only one install base, but this way you can always verify.. Yandere simulator game mac.

Step 21: final

REBOOT to your installed macOS Big Sur system (the normal one). If you’re stuck on boot after approximately 10 minutes, well, you are in a state I wouldn't want to be in. THe only thing left to do is to reset your whole system via Recovery Mode.. else:

  1. Log in (Wi-Fi still should not work, that's normal).
  2. Open a Terminal and run: sudo kcditto
  3. Reboot.

Congrats! Wi-Fi should now work correctly.

In case something went wrong

Macos 11 Big Sur On Unsupported Macs

To revert our changes, in the case they haven't entirely broken the system, REBOOT into your mac OS Big Sur USB and open a Terminal:

  1. Make a backup snapshot bootable (notice -r instead of -s):/System/Library/Filesystems/apfs.fs/Contents/Resources/apfs_systemsnapshot -r 'BeforeWifiKexts' -v /Volumes/<Volume Name>
  2. Mount Preboot as listed in step 19: cd /Volumes/Preboot
  3. mv .broken where is your Volume Group UUID4. cp -r .beforewifikexts where is your Volume Group UUID
  4. REBOOT to your macOS Big Sur original system and check. After that, you can try again, but don’t create BeforeWifiKexts snapshot and don’t copy preboot again! It’s meant to be done once.
    · · ·

That's the end of this large tutorial. Thanks again to all the contributors on MacRumors forums for their help.. and long live to our Macs! I'll try to update this tutorial to see if the other betas break what we fixed with the Wi-Fi or not. Until then, thank you for passing by! 🤟🏼

· · ·

If you tried for yourself or liked this post, don't hesitate to share this article with people it might interest and please share your taughts below in the comments. 😄

Andy Os For Mac
Mac Os X 10.11 Iso

Comments are closed.